Delivered to Jobsite

Culvert Pipe in Paris, TX

DFW Culvert Supply delivers galvanized corrugated steel culvert pipe, coupling bands and safety ends to jobsites in Paris and across Lamar County. We carry pipe from 12" to 96" in diameter in 20', 24' and 30' lengths, for driveways, ranch roads, ditch crossings and site work.

Lamar County, in Northeast Texas near the Red River, has Paris as its county seat. Paris is about 62 miles from the center of our 80-mile delivery area.

Delivered to Paris Jobsites

Tell us your sizes and the jobsite address in Paris. We'll quote the pipe and accessories with delivery included and drop them at your site, so there's no trailer to rent and nothing to haul.

Driveway Culvert Permits in Paris

Inside Paris city limits, driveway and culvert work is typically permitted through the City of Paris. For property in unincorporated Lamar County, check with the county instead. Driveways onto a state highway need a permit from your TxDOT district office. Confirm the required pipe diameter, and whether safety ends are required, before you order.

Culvert Products for Paris Projects

Recent Culvert Deliveries in North Texas

Galvanized culvert pipe delivered to a lot in a new subdivisionCorrugated steel culvert pipe on a cleared building lotThree large-diameter culvert pipes delivered while a crew builds the driveway

Culvert Pipe Questions

What size culvert pipe do I need for my driveway?

It depends on how much water the ditch carries. Many North Texas cities and counties set a minimum diameter for driveway culverts, and some will tell you the exact size when you apply for your permit. Check with your city (inside city limits) or county (unincorporated areas) first, then send us the size and length and we'll quote it.

What gauge culvert pipe should I use?

Most residential driveway culverts use 16-gauge galvanized pipe. Larger diameters, deeper cover or heavy truck traffic can call for a heavier gauge. Tell us your diameter and how the crossing will be used and we'll confirm the right gauge on your quote.

What are culvert safety ends?

Safety ends are sloped end sections, in precast concrete or steel, that go on each end of a culvert. They remove the drop-off at the edge of a driveway or road, improve water flow and reduce erosion. Many cities and counties require them on driveway culverts.

We Also Deliver Near Paris

Get Culvert Pipe Delivered in Paris

Tell us the sizes and lengths you need and where the jobsite is. We'll send back a quote with delivery included.